Odor control systems are ideal for treatment of the odor or eliminating odors associated with waste treatment facilities, microbial decomposition of organic waste, and noxious volatile compounds. Using the fog nozzles to spray odor-neutralizing materials (by others) as odor abatement for landfills and wastewater treatment facilities, hog barns, cattle, and chicken grow-out house odors can be effectively removed.

Odor control systems provide a safe and economical method of eliminating odors. Fog system is particularly effective with all natural neutralizing products.

A totally self-contained ULV (ultra-low-volume) fogging system that siphons liquid from any source to mask, encapsulate or counteract odors at indoor or outdoor problem areas.

Whether it’s a pond, compactor room, waste-water treatment building, trash-transfer site, hospital burn-room or landfill, we have single or multiple nozzle units using quiet, compressed air nozzles to produce fog to cover your problem area with low chemical usage and excellent, uniform atomization of liquids.

Odor Control

Our quiet, built-in compressor and air-atomizing fog nozzle produce excellent atomization to disperse a fine, non-wetting fog into open air, rooms, corridors, ducts or outdoors without wetting the floor and wasting your chemical dollars.

Designed for long life, our polished aluminum enclosed fogger is capable of uniform atomization, adjustable flow control valve for any type chemicals (water or oil base) and will operate on/off all day using the intermittent-timer.

Odour measurement and control operations

TrueMist helps operators to assess the odour impact from their Bone Mill Plant and waste management and to develop and implement the best strategies to reduce both odour emissions and their impact.

We can assist you in integrating best practices into the process, and in drafting and implementing an odour management plan.

In case of continued discomfort caused by odors, we will advise you on end-of-pipe technology treatment such as chemical washing, biotrickling filters or biofiltration.

Problems with off-site odour nuisance are caused at various industrial processes, including product processing, various bone related processing methods, rendering, waste treatment and chemical areas. Odour nuisance can result in complaints from people living in an area close to your factory, which often leads to negative publicity and media attention. In extreme situations it can even to fines, legal actions or closure by local or national authorities.

A solution to odors from industrial processes is always a combination of dedicated measures within the boundary limits of a plant. Persistently and inventively we look beyond the current boundaries of air purification and contribute our ideas throughout the entire process.

Bone Mills, Gelatin factory odor eliminator | Odor contronl system for organic waste processing units

A few enterprises, for example, slaughter houses, raising animals or waste treatment produce smells that aren't so wonderful. Nonetheless, TrueMist can make your workplace much better with a scent control misting system which controls and removes slaughterhouse stinking smells. You have presumably said to yourself "that is the smell of cash," however we can bring in your cash smell much better. 

The feeling of smell is a convoluted connection among molecules and your cerebrum. To begin with, you take in molecules that are suspended noticeable all around. The particles respond with sense receptors in your nose which convey a message to your mind. Your cerebrum deciphers the data and transfers it back to you as a smell. 

Our cerebrums have figured out how to connect a few particles with disagreeable scents since they will in general make us wiped out. For instance, bad meat or waste smells horrendous to gets us far from it. In any case, individuals need to work in landfills or with agrarian waste, yet we can make it more charming. 

Our odor control misting system in India works by breaking the pattern of smell in a few unique ways. Initially, the misting takes the atoms out of the air and settles the residue, so you don't breathe in them. Besides, we add smell neutralizers or sanitizers to assist with killing the microbes and molds that are making the scents in any case. 

If you have a smelly workplace contact TrueMist.in and we can examine how we can assist you with a scent control misting system. The smell of cash doesn't need to reek. TrueMist is the main brand serving the best scope of Odor control system in India. We are giving the system that is planned principally to assist with disposing of the odor issues in various regions. These systems are material in the spaces or say the areas like clinics, parks, neighborhoods, plants, business, and so forth. These are worked by squander treatment bodies like regions, and so on 

Odor can be a justification behind numerous serious issues. The odor control system in India is an original way to deal with control the contamination of a few kinds. These odor control systems are utilized in the water treatment plants like sewage, substance production lines and a lot more to dispose of different most exceedingly awful smells and inebriated air. The primary explanation or say the reason for these terrible scents is because of the toxins dissipating and getting blended in with water. This, thus, is making an issue for the spaces close by homes or the corporate. We have planned different sorts of scent control system like synthetic, organic, carbonic, and so on to decrease the smell harmful material which can be unsafe to the climate. 

Slaughter House Applications: 

These systems are utilized to treat smells from the dirt, air, and water. 

This system aides in treating the terrible stench of blood, excreation, meat etc

This system aides in giving us normal outside air

We are helping in shielding the climate from different rodents and bugs. 

This at long last targets killing the microbes, infection, molds, and so forth 

We are making a system that aides in the end of destructive gas which can influence the ecosystem and ozone layer. 

Indoor and Outdoor Odor Control 

Our systems are successful on both strong and fluid waste and the cycle includes the atomization of killing synthetics (to obstruct the smell discernment), scent safeguards (which adjust the mixtures that cause scents) or totally normal bio-neutralizers that alter the regular disintegration and forestall the development of scent through biodegrading activity. 

Secluded SYSTEM 

Our misting system is tweaked and secluded, as respects each specific circumstance, as per: the setup of the discharge point, the typology of the apparatus to treat, the force and kind of scent. Ease and little estimated spouts and tubing permit a simple to-deal with mounting close to region to treat. 


The advantages are the low expenses whenever contrasted with other smell control systems dependent on water atomization. Energy costs are extremely low and the establishment is exceptionally quick thinking about that the systems are provided in different arrangements, or pre-gathered with straightforward speedy couple.

Slaughter house smell removal mechanism | slaughterhouse stink removal and control system | slaughterhouse odor eliminator

Have you at any point been outside on one of those truly sweltering midyear days espically in the month of April, May or June? 

You need to invest energy outside with your companions however the sun keeps you remaining inside. 

I will show you an incredible method to make a substantial mister so you can partake in the outside during those hot days. 

Misters are incredible in light of the fact that they give sufficient water to keep however cool yet don't douse your attire. 

I needed this set up to fit under a 10 by 10 shade tent, yet this can be adjusted to work with any patio or working with a hose association close by. 

I additionally needed it to be handily detached and moved to different areas. 

Things Needed for DIY misting system

- 10 x 10 Canopy 

- (5) 1/2 inch PVC Pipe 

- (4) 1/2 inch Elbows 

- (4) 1/2 inch Screw-together Couplings 

- (1) On/Off valve 

- (1) 1/2 inch End cap 

- (1) 1/2 inch PVC Hose Connector 

- (20) SS Screw-in or Push fit Misting Nozzles 

- Drill bit/Thread creator 

- PVC stick 

- PVC Cutters 

Setting up the Pipes 

I began with somewhere in the range of 1/2 inch PVC pipe since it is effectively accessible at most home improvement stores. 

I additionally bought some little copper screw-in misting tips that give about a large portion of a gallon of fume each hour. 

The initial step was to gauge the shade, and the best mounting areas ended up being at 9 feet 6 inches. 

So that will be the length on every one of the four side lines. 

To associate each corner I chose to utilize an elbow and a screw together coupling. 

The coupling will consider simple dismantling. 

While sticking these pieces together I ensured the female finish of the multitude of couplings was appended to the elbows. 

This will assist with guaranteeing the lines are widespread to one another I then, at that point, stuck them to the lines. 

Next I estimated the required 9 and ½ feet on the lines, left an imprint and afterward managed the sides. 

Introducing the Misting Nozzles 

Next up was penetrating the openings for every one of the misters. 

To make this simpler, I utilized a boring apparatus with the right string design (worked in) to make this a 1 stage measure. 

Adjusting to a Hose 

I then, at that point, chose to add a fifth line looking down on one corner to effortlessly interface the water source. 

To do that I required a hose connector

This can without much of a stretch be found in the sprinkler area at most home improvement stores. 

I additionally up reviewed the connector by supplanting the current elastic washer to a channel variant to assist with keeping garbage from obstructing the misters. 

In the upward line I additionally added an on off valve so the water could be closed off rapidly if necessary. 

At the highest point of this line I added an extra screw together coupling in the event I expected to alter it later on. 

The lines were almost finished. 

I simply expected to add an end cap to just one of the even lines to cover off the water stream out of the series of lines. 

Hanging to Use 

It was presently an ideal opportunity to hang the set up on the shelter utilizing some zip ties. 

The zip ties functioned admirably and permitted some change depending on the situation which made the system simple to collect. 

I then, at that point, stuck the leftover associations ensuring the point of the misters remained at the fitting areas. 

I additionally stuck the upward line and tied it to one of the legs of the tent. 

In the wake of giving the paste some an ideal opportunity to dry it was perused for a test. 

For the primary test there was a tad of spilling at the screw associations. So I added some Teflon tape in the middle of a portion of these joints, and it worked extraordinary. 

Every one of the parts functioned admirably together and the best part was the simplicity of dismantling. 

Simply unscrew the joints and cut the zip ties. 

Then, at that point, you can undoubtedly store the lines in a vehicle to move.

Tags: Building DIY misting system | how to make a misting system | PVC DIY mist system

Odour :

          Some chemicals with strong odors may cause eye, nose, throat, or lung irritation. Strong odors may cause some people to feel a burning sensation that leads to coughing, wheezing, or other breathing problems. People who smell strong odors may get headaches or feel dizzy or nauseous.


          Odor in the garbage handling rooms are so instance that can bring headache to your labors which will reduce the efficiency of the workforce, to Control such smells, we use the misting system to control the smell from the garbage,


          A series of fogging nozzles were fitted to high-pressure plastic tubing. The nozzles discharged an ultra-fine mist which incorporated a neutralizing agent, thereby eliminating the bad odour. The system also included a high-pressure pump, along with a timer that allows for the operating cycles to be adjusted. For example, the misting system can be run for 20 seconds on and off, or this could be increased or reduced, depending on how busy the facility is. Because the water droplets are so fine, they evaporate quickly and prevent any wetting from occurring.


                   The odor problem was eliminated and the facility was able to continue operating. When an unpleasant odour arises, it is removed completely within a few minutes. In the summer months, the added benefit is that the system has an evaporative cooling effect, reducing the temperature, thereby making it more pleasant for anyone who works within the facility.

A chiller is a heat transfer device that uses refrigeration to remove heat from a process load and transfers the heat to the environment. So, chillers are the cooling machines used for various industrial, commercial, and institutional facilities. They are used to lower the temperatures of all kinds of equipment and processes such as robotic machinery, semiconductors, injection and blow molding machines; welding equipment, die-casting and machine tooling, paper and cement processing, power supplies, power generation stations, compressed air, and gas cooling systems, medical imaging machines, chemical, drug, food, and beverage production. This can even be used simply to cool potable water to desirable levels. In all the applications and processes, water temperature control plays an important role in many of the activities that affect our everyday lives.

Adiabatic Cooling

          The rule is extremely basic – water is showered as a fog onto the approaching air stream. The water expands the overall stickiness of the air, making heat move from the hot, surrounding air to move of warmth via dissipation. This decreases the temperature of the air getting across the curls. Uncommon screens are fitted before the condenser curls which are intended to limit the pressing factor drop of the approaching air stream. The screens are non-metallic to stay away from sick impacts of water. Shower jets are situated before the screens which splash a deliberate measure of water as a fog onto the screens. The control for the splash jets is normally computerized, with amount and recurrence being the factors that are constrained by the framework.

At the point when the encompassing temperature surpasses set qualities, the shower framework draws in and water is splashed onto the screens. The airstream temperature is checked on a nonstop premise and is utilized as an input for the fly shower stream and timing.


                   Utilization of glycol fluids and different kinds of coolants which will hurt the environment gravely so to rectify it we use water as the coolants, we reuse the water as much can which diminishes the contamination

Because of an unnatural weather change, chillers have nowadays become a need of any industry. For example, if the cooling arrangement of an association or industry falls flat or goes haywire, individuals become defenseless because of hot temperatures if quickly an elective game plan isn't given. During summer, especially, a poor or non-working cooling framework might actually ruin individuals' days off prompting censuring associations or alternately lodging's standing. Wasteful chillers can squander huge measures of power, and surprisingly unassuming upgrades in proficiency might yield considerable energy reserve funds and alluring restitutions.

Notwithstanding, select a chiller (and its related effectiveness) cautiously by purchasing a chiller that is profoundly productive. Nonetheless, it may not be practical in all cases. Recollect that chillers are entire of a chilled water framework, and the effectiveness and control of siphons and cooling pinnacles can essentially affect general proficiency.

Amplifying the effectiveness of the chiller alone doesn't guarantee that the framework will work productively. To amplify cost-adequacy, we suggest dissecting the whole chilled water framework just as practicing care in determining the proficiency of the actual chiller.

Adiabatic cooling:

                              To increase the performance and efficiency of the chillers the precooling is used . Adiabatic cooling technology or “precooling” for air-cooled chillers essentially reduces the temperature of the air passing across the cooling coils by spraying water into the incoming air stream. The principle is as water is sprayed in the form of a mist onto the incoming air stream. The water increases the relative humidity of the air, causing heat to transfer from the hot, ambient air to the transfer of heat by way of evaporation. This reduces the temperature of the air moving across the coils.

          The key advantage that this system brings is the reduction in energy costs due to the lowering of the discharge pressures. Studies have shown that a 10-degree reduction in air temperature can lower the power consumption by 12 – 14%.

Overview of Adiabatic Cooling:

          Air-cooled chillers have many advantages over water-cooled chillers – lower maintenance costs as the number of components are less, cheaper to maintain, reduced complicity views no separate cooling towers, pumping systems, etc. Air-cooled chillers are not effective when the ambient temperature becomes very high, especially, in the critical peak temperature days that are experienced in the northern belt of India. The main attraction for water-cooled chillers is the lower energy consumption as compared to air-cooled chillers. The difference in energy can vary from 10 – 25% depending on the application, location, and type of product. Air-cooled chillers of course have the main advantage of using very little water which makes them beneficial in regions where water availability is limited.

Refrigerant gas absorbs the heat from the chilled water and is compressed as in a standard chiller operation. The condensation occurs in the cooling coils rather than in a condenser and the heat exchange medium is air passed across the cooling coils at high speed. Thus, the cooler the air passing across the coils, the better will be the condensation and the lower will be the energy utilization.


                   Chillers consume the maximum amount of energy in a commercial building set up and hence, any opportunity to lower energy usage is an opportunity to lower operating costs for the owners and users. While good use of the  Adiabatic cooling chillers can help reduce energy usage, new technologies that can be retrofitted into the system will lead to large savings. The pre-cooling or adiabatic cooling system is an emerging retrofit option that can with low-cost inputs, lead to sizable savings. The system is easy to install, does not need major modifications and the maintenance costs are low. And the energy is also saved.


           It works by forcing plain water through a specialized type of nozzle to create micron water droplets, releasing them into the air. These droplets attract particles, adding weight to them so they will sink to the ground and can then be effectively removed. Chemical injectors introduce a neutralizing solution into the water supply, allowing high-pressure misting systems to eliminate any type of nuisance odor.

Garbage Handling Room:

          In an indoor environment, high-pressure fog systems can be installed by adding nozzle rings on existing ductwork or fans, creating a matrix that covers the entire workspace or running lines along the perimeter of entry/exit points. An odor control blend is added to the water supply system and then pressurized, creating a fine fog. When the fog is released with the odor control blend mix, a series of chemical reactions completely neutralize the odor in the facility. The fog does not produce wetness on equipment, people, or the grounds due to the high-pressure technology that atomizes water droplets.

Application of Misting System:             

                   Total odor elimination is a requirement due to potential health and environmental concerns. Some of these common odors are cannabis odors, carbon dioxide, ammonia, hydrogen sulfide, and methane. Treating these odors the right way is important, especially because carbon dioxide and methane are both odorless and potentially lethal. As a business owner, it’s up to you to ensure your staff is safe at all times.

Chemicals Used :

                             Potassium permanganate, sodium hypochlorite, chlorine dioxide, ozone, and dichromate these chemicals are commonly used as control agents other than chemicals water can also used to controlling odor


                   This fog will not make equipment, workers, or floors in your facility wet thanks to the high-pressure technology we put into place. Controlling odors in outdoor environments requires a slightly different approach. Our Misting System will run high-pressure fog lines outside to create fine fog while using the same odor control blend to knock down and eliminate odors. The chemical reactions that are created when the fog and proprietary blend combine are enough to get rid of most odors in any outdoor area

What Is Adiabatic Cooling? 

Adiabatic cooling works on the standards of thermodynamics where energy (heat) is moved starting with one medium then onto the next as "work" without a real trade of mass. The adiabatic cooling measure happens when a decrease in the pressing factor inside a framework causes a volume extension, bringing about "work" on the general climate. 

Adiabatic cooling frameworks exploit this compel temperature relationship to give cooling across an expansive scope of modern cycles. 

How Do Adiabatic Cooling Systems Work? 

A normal adiabatic cooling framework pulls air from the outer climate, lessens its temperature by vanishing water in its quality, and afterward takes care of the cooled air to a warmth exchanger. The warm exchanger takes out heat energy from the related interaction/hardware and moves it to the cool encompassing air. When warmed, the temperature of the coursing air is brought down by vanishing before another cooling cycle. 

Adiabatic cooling can be one of three sorts: 

Direct Adiabatic Cooling 

This cycle, otherwise called wet-bulb cooling is named direct on the grounds that there is an immediate association among water and air used inside the framework. Water is straightforwardly dissipated into a surge of warmed air to work with its cooling. This is the most broadly utilized adiabatic cooling method around the world. 

Circuitous Adiabatic Cooling 

In circuitous adiabatic (evaporative) cooling, water is dissipated independently in a section of air that is unmistakable from the air stream expected for cooling. Warmth trade happens at the outside of the lines through which the warmed air is being led. Moist dissipated air ignored the outside of the hot air channels will retain the warmth and cool the air inside them. 

Roundabout/Direct (Two-Stage) Adiabatic Cooling 

A two-stage cooling measure consolidates components of both immediate and circuitous evaporative cooling strategies. The principal phase of the cycle is aberrant cooling accomplished by recycling cold water in a warmth exchanger to take out heat from the surrounding air. The second 50% of this cooling system is an immediate "wet bulb" stage which further decreases the temperature of the cooling air. Carrying the air to be cooled into direct contact with the dissipating water will make its temperatures drop to wanted levels. 

Joining both, immediate and aberrant cooling stages permits more fast cooling to try and lower temperatures than what is accomplished utilizing either technique alone. Additionally, two-stage cooling is very energy-proficient, cost-saving, and harmless to the ecosystem option in contrast to other independent adiabatic cooling strategies. 

Uses of Adiabatic Cooling Systems 

Nowadays Adiabatic cooling frameworks are as of now utilized in a wide scope of businesses and modern cycles to keep up with ideal working temperatures of the environment. Other normal uses of adiabatic cooling gadgets include:

Advantages of Adiabatic Cooling 

The outdoor environment is a risky place for people to be during the summer. The heat can be unbearable and, without protection, it could lead to serious consequences. High-pressure misting fans are an excellent way to combat the outdoor heat, and they're easy to use! This blog post will cover what high-pressure misting fans are, how they work, why they should be used in outdoor environments (and indoors too!), and more.

Keeping cool in the singing summer heat has moved to a higher level with high-pressure factor misting fan systems. These misting fans give help from the searing summer heat and are intended to keep going for quite a while, also that they are for all intents and purposes upkeep-free. 

High-pressure factor misting framework fans are regularly utilized in monstrous business applications. They are prevalently utilized in arenas, and on the off chance that you have at any point been inside an arena you know precisely how hot, stodgy, and moist it can get. High pressure factor misting fans can cover enormous regions and keep them cool by evaporative and heat move standards. They are additionally prominently utilized in greenhouses to hold the plants back from drying out and shriveling on incredibly hot days. Now and again, they have even expanded the yield of these plants. 

How is High Pressure Misting Fans Works?

This framework chips away at high pressing factor misting siphon and mist making nozzles to make little water drops (mist) that are showered over the space in the fan's reach. It doesn't splash anything wet nor does it leave dampness buildup on your open-air furniture or gear. The fan splashes an ultra-fine mist over a space that ranges 5 to 6 before the fan cooling the encompassing temperature by as much as 30 degrees. You have the alternative to set the fan on wavering, in the event that you don't need a solitary fixed bearing. 

The pressing factor of TrueMist’s high pressing factor misting fans ranges between 1000 and 1500 PSI. This makes the mist dissipate totally, quickly. You can buy these fan misting frameworks online on our site. You have a wide range of misting frameworks to look over; they range from fixed fans to versatile misting gadgets and complete misting answers for both private and business applications. 

The evaporative cooling gave by misting frameworks is basic and normal just as an incredible cycle. Here is the manner by which it works with misting frameworks: 

A misting siphon is utilized to compress the water from the hose. A 1000 PSI is standard for most high pressing factor outside misting frameworks. 

In higher pressing factor nozzles, the power source is customizable and can be squeezed down to deliver better water beads or mist. 

The explanation mist dissipates so rapidly is on the grounds that it utilizes the warmth noticeable all around. Every bead as it dissipates takes a bit of warmth with it. Scale this up to a huge number of beads and the outcome is a quickly cooler climate. 

TrueMist’s high pressing factor misting systems are loaded with quality nickel-plated metal fittings, adaptable UV treated nylon or inflexible tubing made of stainless steel, ultra-fine mist nozzles made of stainless steel with an enemy of trickle component and business or mechanical obligation mist siphon with worked in highlights like warm security, pressure discharge, no water cut-off, and solenoid. Employments of these misting frameworks are ceaseless and then some and more individuals understand that.

© 2023 All Rights Reserved | Truemist Misting and Fogging System | Powered by Ingenium Digital
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram